org.axonframework.config

Interface Configurer

All Known Implementing Classes:

DefaultConfigurer

public interface Configurer

Entry point of the Axon Configuration API.

Using DefaultConfigurer.defaultConfiguration(), you will get a Configurer instance with default components configured. You will need to register your Aggregates (using configureAggregate(AggregateConfiguration) and provide a repository implementation for each of them, or if you wish to use event sourcing, register your aggregates through configureAggregate(Class) and configure an Event Store (configureEventStore(Function) or configureEmbeddedEventStore(Function)).

See Also:

DefaultConfigurer

Method Summary

Modifier and Type	Method and Description
Configuration	buildConfiguration() Returns the completely initialized Configuration built using this configurer.
<A> Configurer	configureAggregate(AggregateConfiguration<A> aggregateConfiguration) Configures an Aggregate in this configuration based on the given aggregateConfiguration.
default <A> Configurer	configureAggregate(Class<A> aggregate) Configures an Aggregate using default settings.
default Configurer	configureCommandBus(Function<Configuration,CommandBus> commandBusBuilder) Configures the given Command Bus to use in this configuration.
Configurer	configureCorrelationDataProviders(Function<Configuration,List<CorrelationDataProvider>> correlationDataProviderBuilder) Configures the CorrelationDataProviders that Message processing components should use to attach correlation data to outgoing messages.
Configurer	configureEmbeddedEventStore(Function<Configuration,EventStorageEngine> storageEngineBuilder) Configures an Embedded Event Store which uses the given Event Storage Engine to store its events.
default Configurer	configureEventBus(Function<Configuration,EventBus> eventBusBuilder) Configures the given Event Bus to use in this configuration.
Configurer	configureEventSerializer(Function<Configuration,Serializer> eventSerializerBuilder) Configures the given event Serializer to use in this configuration.
default Configurer	configureEventStore(Function<Configuration,EventStore> eventStoreBuilder) Configures the given Event Store to use in this configuration.
default Configurer	configureMessageMonitor(Class<?> componentType, Function<Configuration,MessageMonitor<Message<?>>> messageMonitorBuilder) Configures the builder function to create the Message Monitor for the Message processing components in this configuration that match the given componentType, unless more specific configuration based on both type and name is available.
Configurer	configureMessageMonitor(Class<?> componentType, MessageMonitorFactory messageMonitorFactory) Configures the factory to create the Message Monitor for the Message processing components in this configuration that match the given componentType, unless more specific configuration based on both type and name is available.
default Configurer	configureMessageMonitor(Class<?> componentType, String componentName, Function<Configuration,MessageMonitor<Message<?>>> messageMonitorBuilder) Configures the builder function to create the Message Monitor for the Message processing components in this configuration that match the given class and name.
Configurer	configureMessageMonitor(Class<?> componentType, String componentName, MessageMonitorFactory messageMonitorFactory) Configures the factory create the Message Monitor for those Message processing components in this configuration that match the given class and name.
Configurer	configureMessageMonitor(Function<Configuration,BiFunction<Class<?>,String,MessageMonitor<Message<?>>>> messageMonitorFactoryBuilder) Configures the Message Monitor to use for the Message processing components in this configuration, unless more specific configuration based on the component's type, or type and name is available.
Configurer	configureMessageSerializer(Function<Configuration,Serializer> messageSerializerBuilder) Configures the given event Serializer to use in this configuration.
default Configurer	configureQueryBus(Function<Configuration,QueryBus> queryBusBuilder) Configures the given Query Bus to use in this configuration.
default Configurer	configureQueryUpdateEmitter(Function<Configuration,QueryUpdateEmitter> queryUpdateEmitterBuilder) Configures the given Query Update Emitter to use in this configuration.
default Configurer	configureResourceInjector(Function<Configuration,ResourceInjector> resourceInjectorBuilder) Configures the given Resource Injector to use for Sagas in this configuration.
default Configurer	configureSerializer(Function<Configuration,Serializer> serializerBuilder) Configures the given Serializer to use in this configuration.
default Configurer	configureTransactionManager(Function<Configuration,TransactionManager> transactionManagerBuilder) Configures the given Transaction Manager to use in this configuration.
EventProcessingConfigurer	eventProcessing() Retrieve the EventProcessingConfigurer registered as a module with this Configurer.
default Configurer	eventProcessing(Consumer<EventProcessingConfigurer> eventProcessingConfigurer) Locates the EventProcessingConfigurer registered as a module with this Configurer and provides it to the given consumer for configuration.
default Configurer	registerCommandHandler(Function<Configuration,Object> annotatedCommandHandlerBuilder) Registers a command handler bean with this configuration.
Configurer	registerCommandHandler(int phase, Function<Configuration,Object> annotatedCommandHandlerBuilder) Registers a command handler bean with this configuration.
<C> Configurer	registerComponent(Class<C> componentType, Function<Configuration,? extends C> componentBuilder) Registers a component which should be made available to other components or modules in this Configuration.
default Configurer	registerEventHandler(Function<Configuration,Object> eventHandlerBuilder) Registers a Function that builds an Event Handler instance.
Configurer	registerEventUpcaster(Function<Configuration,EventUpcaster> upcasterBuilder) Registers an upcaster to be used to upcast Events to a newer version
Configurer	registerHandlerDefinition(BiFunction<Configuration,Class,HandlerDefinition> handlerDefinitionClass) Registers the definition of a Handler class.
Configurer	registerModule(ModuleConfiguration module) Registers an Axon module with this configuration.
default Configurer	registerQueryHandler(Function<Configuration,Object> annotatedQueryHandlerBuilder) Registers a query handler bean with this configuration.
Configurer	registerQueryHandler(int phase, Function<Configuration,Object> annotatedQueryHandlerBuilder) Registers a query handler bean with this configuration.
default Configuration	start() Builds the configuration and starts it immediately.

Method Detail

registerEventUpcaster

Configurer registerEventUpcaster(Function<Configuration,EventUpcaster> upcasterBuilder)

Registers an upcaster to be used to upcast Events to a newer version

Parameters:

upcasterBuilder - The function that returns an EventUpcaster based on the configuration

Returns:

the current instance of the Configurer, for chaining purposes

configureMessageMonitor

Configurer configureMessageMonitor(Function<Configuration,BiFunction<Class<?>,String,MessageMonitor<Message<?>>>> messageMonitorFactoryBuilder)

Configures the Message Monitor to use for the Message processing components in this configuration, unless more specific configuration based on the component's type, or type and name is available. The builder function receives the type of component as well as its name as input, and is expected to return a MessageMonitor instance to be used by that type of component.

Parameters:

messageMonitorFactoryBuilder - The MessageMonitor builder function

Returns:

the current instance of the Configurer, for chaining purposes

configureMessageMonitor

default Configurer configureMessageMonitor(Class<?> componentType,
                                           Function<Configuration,MessageMonitor<Message<?>>> messageMonitorBuilder)

Configures the builder function to create the Message Monitor for the Message processing components in this configuration that match the given componentType, unless more specific configuration based on both type and name is available.

A component matches componentType if componentType is assignable from the component's class. If a component matches multiple types, and the types derive from each other, the configuration from the most derived type is used. If the matching types do not derive from each other, the result is unspecified.

For example: in case a monitor is configured for CommandBus and another monitor is configured for SimpleCommandBus), components of type AsynchronousCommandBus will use the monitor configured for the SimpleCommandBus.

A component's name matches componentName if they are identical; i.e. they are compared case sensitively.

Parameters:

componentType - The declared type of the component

messageMonitorBuilder - The builder function to use

Returns:

the current instance of the Configurer, for chaining purposes

configureMessageMonitor

Configurer configureMessageMonitor(Class<?> componentType,
                                   MessageMonitorFactory messageMonitorFactory)

Configures the factory to create the Message Monitor for the Message processing components in this configuration that match the given componentType, unless more specific configuration based on both type and name is available.

A component matches componentType if componentType is assignable from the component's class. If a component matches multiple types, and the types derive from each other, the configuration from the most derived type is used. If the matching types do not derive from each other, the result is unspecified.

For example: in case a monitor is configured for CommandBus and another monitor is configured for SimpleCommandBus), components of type AsynchronousCommandBus will use the monitor configured for the SimpleCommandBus.

A component's name matches componentName if they are identical; i.e. they are compared case sensitively.

Parameters:

componentType - The declared type of the component

messageMonitorFactory - The factory to use

Returns:

the current instance of the Configurer, for chaining purposes

configureMessageMonitor

default Configurer configureMessageMonitor(Class<?> componentType,
                                           String componentName,
                                           Function<Configuration,MessageMonitor<Message<?>>> messageMonitorBuilder)

Configures the builder function to create the Message Monitor for the Message processing components in this configuration that match the given class and name.

A component matches componentType if componentType is assignable from the component's class. If a component matches multiple types, and the types derive from each other, the configuration from the most derived type is used. If the matching types do not derive from each other, the result is unspecified.

For example: in case a monitor is configured for CommandBus and another monitor is configured for SimpleCommandBus), components of type AsynchronousCommandBus will use the monitor configured for the SimpleCommandBus.

A component's name matches componentName if they are identical; i.e. they are compared case sensitively.

Parameters:

componentType - The declared type of the component

componentName - The name of the component

messageMonitorBuilder - The builder function to use

Returns:

the current instance of the Configurer, for chaining purposes

configureMessageMonitor

Configurer configureMessageMonitor(Class<?> componentType,
                                   String componentName,
                                   MessageMonitorFactory messageMonitorFactory)

Configures the factory create the Message Monitor for those Message processing components in this configuration that match the given class and name.

A component matches componentType if componentType is assignable from the component's class. If a component matches multiple types, and the types derive from each other, the configuration from the most derived type is used. If the matching types do not derive from each other, the result is unspecified.

For example: in case a monitor is configured for CommandBus and another monitor is configured for SimpleCommandBus), components of type AsynchronousCommandBus will use the monitor configured for the SimpleCommandBus.

A component's name matches componentName if they are identical; i.e. they are compared case sensitively.

Parameters:

componentType - The declared type of the component

componentName - The name of the component

messageMonitorFactory - The factory to use

Returns:

the current instance of the Configurer, for chaining purposes

configureCorrelationDataProviders

Configurer configureCorrelationDataProviders(Function<Configuration,List<CorrelationDataProvider>> correlationDataProviderBuilder)

Configures the CorrelationDataProviders that Message processing components should use to attach correlation data to outgoing messages. The builder function receives the Configuration as input and is expected to return a list or CorrelationDataProviders.

Parameters:

correlationDataProviderBuilder - the builder function returning the CorrelationDataProvider list

Returns:

the current instance of the Configurer, for chaining purposes

registerModule

Configurer registerModule(ModuleConfiguration module)

Registers an Axon module with this configuration. The module is initialized when the configuration is created and has access to the global configuration when initialized.

Typically, modules are registered for Event Handling components or Sagas.

Parameters:

module - The module to register

Returns:

the current instance of the Configurer, for chaining purposes

See Also:

SagaConfiguration

registerComponent

<C> Configurer registerComponent(Class<C> componentType,
                                 Function<Configuration,? extends C> componentBuilder)

Registers a component which should be made available to other components or modules in this Configuration. The builder function gets this configuration as input, and is expected to provide the component as output.

Where possible, it is recommended to use the explicit configure... and register... methods.

Type Parameters:

C - The type of component

Parameters:

componentType - The declared type of the component, typically an interface

componentBuilder - The builder function of this component

Returns:

the current instance of the Configurer, for chaining purposes

registerCommandHandler

default Configurer registerCommandHandler(Function<Configuration,Object> annotatedCommandHandlerBuilder)

Registers a command handler bean with this configuration. The bean may be of any type. The actual command handler methods will be detected based on the annotations present on the bean's methods.

The builder function receives the Configuration as input, and is expected to return a fully initialized instance of the command handler bean.

Parameters:

annotatedCommandHandlerBuilder - The builder function of the Command Handler bean

Returns:

the current instance of the Configurer, for chaining purposes

registerCommandHandler

Configurer registerCommandHandler(int phase,
                                  Function<Configuration,Object> annotatedCommandHandlerBuilder)

Registers a command handler bean with this configuration. The bean may be of any type. The actual command handler methods will be detected based on the annotations present on the bean's methods.

The builder function receives the Configuration as input, and is expected to return a fully initialized instance of the command handler bean.

Parameters:

annotatedCommandHandlerBuilder - The builder function of the Command Handler bean

phase - defines a phase in which the command handler builder will be invoked during Configuration.start() and Configuration.shutdown(). When starting the configuration handlers are ordered in ascending, when shutting down the configuration, descending order is used.

Returns:

the current instance of the Configurer, for chaining purposes

registerQueryHandler

default Configurer registerQueryHandler(Function<Configuration,Object> annotatedQueryHandlerBuilder)

Registers a query handler bean with this configuration. The bean may be of any type. The actual query handler methods will be detected based on the annotations present on the bean's methods.

The builder function receives the Configuration as input, and is expected to return a fully initialized instance of the query handler bean.

Parameters:

annotatedQueryHandlerBuilder - The builder function of the Query Handler bean

Returns:

the current instance of the Configurer, for chaining purposes

registerQueryHandler

Configurer registerQueryHandler(int phase,
                                Function<Configuration,Object> annotatedQueryHandlerBuilder)

Registers a query handler bean with this configuration. The bean may be of any type. The actual query handler methods will be detected based on the annotations present on the bean's methods.

The builder function receives the Configuration as input, and is expected to return a fully initialized instance of the query handler bean.

Parameters:

annotatedQueryHandlerBuilder - The builder function of the Query Handler bean

phase - defines a phase in which the query handler builder will be invoked during Configuration.start() and Configuration.shutdown(). When starting the configuration handlers are ordered in ascending, when shutting down the configuration, descending order is used.

Returns:

the current instance of the Configurer, for chaining purposes

configureEmbeddedEventStore

Configurer configureEmbeddedEventStore(Function<Configuration,EventStorageEngine> storageEngineBuilder)

Configures an Embedded Event Store which uses the given Event Storage Engine to store its events. The builder receives the Configuration as input and is expected to return a fully initialized EventStorageEngine instance.

Parameters:

storageEngineBuilder - The builder function for the EventStorageEngine

Returns:

the current instance of the Configurer, for chaining purposes

configureEventStore

default Configurer configureEventStore(Function<Configuration,EventStore> eventStoreBuilder)

Configures the given Event Store to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized EventStore instance.

Parameters:

eventStoreBuilder - The builder function for the EventStore

Returns:

the current instance of the Configurer, for chaining purposes

configureEventBus

default Configurer configureEventBus(Function<Configuration,EventBus> eventBusBuilder)

Configures the given Event Bus to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized EventBus instance.

Note that this builder should not be used when an Event Store is configured. Since Axon 3, the Event Store will act as Event Bus implementation as well.

Parameters:

eventBusBuilder - The builder function for the EventBus

Returns:

the current instance of the Configurer, for chaining purposes

configureCommandBus

default Configurer configureCommandBus(Function<Configuration,CommandBus> commandBusBuilder)

Configures the given Command Bus to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized CommandBus instance.

Parameters:

commandBusBuilder - The builder function for the CommandBus

Returns:

the current instance of the Configurer, for chaining purposes

configureQueryBus

default Configurer configureQueryBus(Function<Configuration,QueryBus> queryBusBuilder)

Configures the given Query Bus to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized QueryBus instance.

Parameters:

queryBusBuilder - The builder function for the QueryBus

Returns:

the current instance of the Configurer, for chaining purposes

configureQueryUpdateEmitter

default Configurer configureQueryUpdateEmitter(Function<Configuration,QueryUpdateEmitter> queryUpdateEmitterBuilder)

Configures the given Query Update Emitter to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized QueryUpdateEmitter instance.

Parameters:

queryUpdateEmitterBuilder - The builder function for the QueryUpdateEmitter

Returns:

the current instance of the Configurer, for chaining purposes

configureSerializer

default Configurer configureSerializer(Function<Configuration,Serializer> serializerBuilder)

Configures the given Serializer to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized Serializer instance.

Parameters:

serializerBuilder - The builder function for the Serializer

Returns:

the current instance of the Configurer, for chaining purposes

configureEventSerializer

Configurer configureEventSerializer(Function<Configuration,Serializer> eventSerializerBuilder)

Configures the given event Serializer to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized Serializer instance.

This Serializer is specifically used to serialize EventMessage payload and metadata.

Parameters:

eventSerializerBuilder - The builder function for the Serializer.

Returns:

The current instance of the Configurer, for chaining purposes.

configureMessageSerializer

Configurer configureMessageSerializer(Function<Configuration,Serializer> messageSerializerBuilder)

Configures the given event Serializer to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized Serializer instance.

This Serializer is specifically used to serialize Message payload and Metadata.

Parameters:

messageSerializerBuilder - The builder function for the Serializer.

Returns:

The current instance of the Configurer, for chaining purposes.

configureTransactionManager

default Configurer configureTransactionManager(Function<Configuration,TransactionManager> transactionManagerBuilder)

Configures the given Transaction Manager to use in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized TransactionManager instance.

Parameters:

transactionManagerBuilder - The builder function for the TransactionManager

Returns:

the current instance of the Configurer, for chaining purposes

configureResourceInjector

default Configurer configureResourceInjector(Function<Configuration,ResourceInjector> resourceInjectorBuilder)

Configures the given Resource Injector to use for Sagas in this configuration. The builder receives the Configuration as input and is expected to return a fully initialized ResourceInjector instance.

Parameters:

resourceInjectorBuilder - The builder function for the ResourceInjector

Returns:

the current instance of the Configurer, for chaining purposes

configureAggregate

<A> Configurer configureAggregate(AggregateConfiguration<A> aggregateConfiguration)

Configures an Aggregate in this configuration based on the given aggregateConfiguration. This method allows for more fine-grained configuration compared to the configureAggregate(Class) method.

Type Parameters:

A - The type of aggregate the configuration is for

Parameters:

aggregateConfiguration - The instance describing the configuration of an Aggregate

Returns:

the current instance of the Configurer, for chaining purposes

See Also:

AggregateConfigurer

configureAggregate

default <A> Configurer configureAggregate(Class<A> aggregate)

Configures an Aggregate using default settings. This means the aggregate is expected to be Event Sourced if an Event Store present in the configuration. Otherwise, an explicit repository must be configured and the configureAggregate(AggregateConfiguration) must be used to register the aggregate.

Type Parameters:

A - The type of aggregate

Parameters:

aggregate - The aggregate type to register with the Configuration

Returns:

the current instance of the Configurer, for chaining purposes

registerHandlerDefinition

Configurer registerHandlerDefinition(BiFunction<Configuration,Class,HandlerDefinition> handlerDefinitionClass)

Registers the definition of a Handler class. Defaults to annotation based recognition of handler methods.

Parameters:

handlerDefinitionClass - A function providing the definition based on the current Configuration as well as the class being inspected.

Returns:

the current instance of the Configurer, for chaining purposes

eventProcessing

EventProcessingConfigurer eventProcessing()
                                   throws AxonConfigurationException

Retrieve the EventProcessingConfigurer registered as a module with this Configurer. If there aren't any, it will create an EventProcessingModule and register it as a module. If there are multiple, an AxonConfigurationException is thrown.

Returns:

an instance of Event Processing Configurer

Throws:

AxonConfigurationException - thrown if there are multiple EventProcessingConfigurers

eventProcessing

default Configurer eventProcessing(Consumer<EventProcessingConfigurer> eventProcessingConfigurer)
                            throws AxonConfigurationException

Locates the EventProcessingConfigurer registered as a module with this Configurer and provides it to the given consumer for configuration. If there aren't any pre-registered instances of EventProcessingConfigurer, it will create an EventProcessingModule and register it as a module. If there are multiple, an AxonConfigurationException is thrown. This method is identical to using eventProcessing(), except that this variant allows for easier fluent interfacing.

Parameters:

eventProcessingConfigurer - a consumer to configure the

Returns:

an instance of Event Processing Configurer

Throws:

AxonConfigurationException - thrown if there are multiple EventProcessingConfigurers

registerEventHandler

default Configurer registerEventHandler(Function<Configuration,Object> eventHandlerBuilder)

Registers a Function that builds an Event Handler instance.

Parameters:

eventHandlerBuilder - a Function that builds an Event Handler instance.

Returns:

the current instance of the Configurer, for chaining purposes.

buildConfiguration

Configuration buildConfiguration()

Returns the completely initialized Configuration built using this configurer. It is not recommended to change any configuration on this Configurer once this method is called.

Returns:

the fully initialized Configuration

start

default Configuration start()

Builds the configuration and starts it immediately. It is not recommended to change any configuration on this Configurer once this method is called.

Returns:

The started configuration